eureka hepa filter This is a topic that many people are looking for. drustvosns.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, drustvosns.org would like to introduce to you Replacing Vacuum Belt On A Eureka U Type Vacuum. Following along are instructions in the video below:
“Are two eureka type vacuum cleaners they re both 12 amps and they re very very similar in in design. But you ve noticed that your old vacuum cleaners. The head stops spinning and what that usually means either the belt inside is snapped or it has come off the the workings that make it spin. Now if it comes off the working so you can put it back on.
But you know if that happens often then it s not you may have a problem with your vacuum. Cleaner mine was coming off every four or sari every 10 or 15 minutes. So finally i just gave up on it and bought a new one this one here which i m hoping will not do the same thing. The procedure is the same either way you need to take the top housing off and on this vacuum.
Cleaner. There s one two three four screws to get it off. And there philips and on that one there s three to get it off and they re all philips as well so what i m going to do is going to take this one apart and show you how to replace the brush drive belt. Okay as i said on this particular eureka.
There s only three cover three top screws on this that actually take the top cover off. There s one on this corner..
One on that corner and one at the back right. There you can see it so we ll start with that one yeah work a little bit of an angle here. But it s okay it still comes off one and it s philips and the other one in this corner. That s three and now the cover just lifts off like that they re ready for a mess.
Okay and as if you can see you can see that this belt right. Here. Let s come off right off the drive axle right here. So we have to replace it or you can put it back on again.
If you wish here s my issue with that i already have a replacement belt. Number one and in this case. It s a eureka replacement belt. And it s called au au belt.
And there s two in this package. I ve already used one that s this one right here..
And what i m gonna do is i m just gonna take this off. Now the way you take this off is you lift two brushes out. So you can just like that lift them up and first thing. You ll notice in this case.
Is that one belts much larger than the other so the other ones stretched. So the old one is stretched out so taking your old one in to compare it to their new one may not be the best idea because you all come with us come up with the same size. But if you have a eureka 12 amp and you know your model you can go into the store or go on online and get that and i m gonna play place. If you give you a link for this model and which is the same as my new model that i bought and on the box on the bag itself it actually has the models on it as well so you know that you re getting the right belt for the right machine.
Okay. So we re going to take this one out. I guess is that trick if you you know if your belt still good or you know you don t have another belt to replace it i suggest turning it around and putting it in the other way. But this one here.
I don t know if you can see that or not. But it has a splitting already anyway so it s done..
There s no need to put that back on so basically replace it so the brush assembly has square end caps on it okay and they fit into these end caps right here all right and you can clean them out a little bit just to give us some of the junk in there same in there. And if you wish on the brush assembly. You can get rid of some of the junk on that as well okay. But not really all that necessary so we ll put that back in this little slot.
Then we ll put the belt around the axle. Like that the next step is crucial you lift the brush out. And you place the belt around it like so okay and then pull it back into its slot alright at this point. You may want to just turn.
It a little bit just to get it centered up on that there you go and then make sure you got it on the axle. Nice there as well because the first thing. You do you don t want to do is start this up and have it come off and break now if this happens to you all the time. And there s something wrong with a vacuum cleaner.
I always suggest at that point replace it with either get it fixed or replace. It these are not really expensive vacuum cleaners and this one s seven years old at this point..
So it s it s done its duty for me okay. So once you make sure that these the brush head is secure on both ends. And you can tell because you can t move either side inside its housing and this spins. Nicely next step is put the cover back on and that just fits loosening on top put your three screws back in that s the second one and the third one s a bit of a trick on this model.
Right. Here my other one has four screws in it a lot easier to get at than this one. But this is you know the other ones brand new. I don t want to pick it apart.
So i took this one apart just to show you okay then just plug it in test it out see how it goes see if it s spinning never plug it in with the cover off okay that brush will come on out. At 90 miles an hour and hit and hurt you as you can see it s spinning so you re ready to go. ” ..
Thank you for watching all the articles on the topic Replacing Vacuum Belt On A Eureka U Type Vacuum. All shares of drustvosns.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.